Remove or Bypass FRP Lock on Huawei Honor Play 8A JAT-L29

Hello everyone today we are going to share an amazing tutorial with you. If you are using a Huawei Honor Play 8A JAT-L29 smartphone and you want to remove or bypass FRP locks but you don’t know how to do this. Here on this page, we will guide you step by step to easily remove FRP locks from the supported smartphones through SP Flash File.

For doing that job, your mobile phone battery charge must be 30% to 40%. In case the device battery is not 30-40% then connect your charger to complete the charge requirement. Must check; SPD Flash Tool Download.

Step by Step to Remove/Bypass FRP Lock on Huawei Honor 8A JAT-L29

  • First of all, download and install the MediaTek supported driver on your computer. If you have already installed the supported driver then skip this step.
  • After that download and click to extract Huawei honor 8A JAT-L29 full supported FRP file on your PC. And once the FRP file is successfully extracted you will get the following files below.
  • And then click to download sp flash file latest version on your computer. After downloading right-click to extract the sp flash tool.
  • Double click to open the SP Flash Tool on your computer.
  • When the smartphone flash tool is opened, click on the scatter-loading button and load the Huawei honor scatter file.
  • Tap on the authentication file option and locate the auth_sv5.auth file from the FRP file folder that you have already downloaded in above step 2.
  • Now click on the format menu option to proceed.
  • And under the format menu select the manual format flash option, not auto.
  • Set the following parameters; Region; EMMC_USER, Begin Address [HEX]: 0x108000, format length[HEX]:0x100000
  • Click on the start button to start the remove FRP process.
  • Make a connection between mobile phone and computer using a USB data cable. It’s a very important thing your device must be power off. After connecting press volume down or up keys on the phone to detect by SP Flash Tool.
  • Once the Smartphone flash tool detects the device, the FRP bypass process will start automatically and take up to 3 minutes to complete. When bypassing completely you will see a green tick at the end.
  • Click on the close button to close the sp flash tool and remove the connection from the computer.
  • Restart your device and enjoy it.

LEAVE A REPLY

Please enter your comment!
Please enter your name here